Digital View 559000105?3 Spezifikationen Seite 22

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 70
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 21
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.6: 27 March, 2012 (SGX-1920_manual.doc) Page
22 of 70
CNA2 - Auxiliary power output: JST B2B-PH-K (Matching type : PHR-2)
PIN SYMBOL DESCRIPTION
1 Vcc_5V +5V DC, 500mA max with fuse
2 GND Ground
CNB1 – Backlight inverter connector: JST B5B-XH-A (Matching type : XHP-5)
PIN SYMBOL DESCRIPTION
1 GND Ground
2 VBKL +12V / +24V DC, backlight power supply
3 BLCTRL On/Off control (enable) – see JB2 & JB3
4 BVR_WIP Brightness VR – WIP
5 BVR_A Brightness VR A
CNB2 – Backlight status input inverter connector: JST B2B-XH-A (Matching type : XHP-2 )
PIN SYMBOL DESCRIPTION
1 BL_STATUS Backlight status (Normal = High)
2 GND Ground
CNC1 – Function controls connector: JST B12B-XH-A (Matching type : XHP-12)
PIN SYMBOL DESCRIPTION
1 PSWIN Power switch A
2 SW_ON Power switch B
3 BVR_A Backlight brightness VR pin A
4 BVR_WIP Backlight brightness VR pin WIP
5 BVR_B
Backlight brightness VR pin B (470 resistor to +5V Vcc)
6 GND Ground
7 MENU OSD menu button
8 -/LEFT OSD -/Left button
9 +/RIGHT OSD +/Right button
10 SEL_DN OSD Select down button
11 SEL_UP OSD Select up button
12 NC No connection
The VR for brightness depends on the inverter. The main power load for On/Off is handled by a relay on the controller.
CNV5 – Auxiliary Video input connector, JST B26B-PHDSS, 26 ways (Matching video cable P/N 426301700-3)
PIN DESCRIPTION
1 S-Video 1 : Chroma in
2 Ground
3 S-Video 1 : Luma in
4 Ground
5 Composite video 1 in
6 Ground
7 Y in_1
8 Ground
9 Cb/Pb in_1
10 Ground
11 Cr/Pr in_1
12 Ground
13 S-Video 2 : Chroma in
14 Ground
15 S-Video 2 : Luma in
16 Ground
17 Composite video in 2
18 Ground
19 Cr/Pr in_2
20 Ground
21 Y in_2
22 Ground
23 Cb/Pb in_2
24 Ground
25 Reserved
26 Ground
HD1 – Auxiliary Digital input connector – HD1 : JST BM20B-SRDS
(Matching type : SHDR-20V-S-B)
PIN SYMBOL DESCRIPTION
1 GND Digital Ground
2 GND Digital Ground
3 RXC TMDS Clock+
4 /RXC TMDS Clock-
5 RX0 TMDS Data 0+
Seitenansicht 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare